To enable volume discounts on this site, You will see a discount applied at the bottom of the shopping cart. Competitive pricing is available. Contact us for details.
You can place the order on website: www.pswpower.com
Our website elifebike.com can calculate shipping cost automatically before you check out.
Colourful KT-LCD8S LCD Meter with Waterproof plug and USB mobile charge port for KT-Series Controller. It only fits KT series controllers. It is not suitable for other controllers.
1. Dimension: 20.4x67x109mm.
2. Voltage: fits for 24V, 36V or 48V batteries.
Note: How to determine the value of the parameter P5 ?
The formula is LVC+P5/3.77.
For 24V battery, LVC=20V, P5/3.77=1.
For 36V battery, LVC=30V, P5/3.77=1.5.
For 48V battery, LVC=40V, P5/3.77=2.
You can adjust P5 parameter by your own battery discharge curve.
It is a smart LCD. You can not test it by only voltage. You need to install it on your E-Bike and pedal for 3-5 seconds. Then the LCD will show battery level normally.
Panel cable Length: 30cm
Water proof Cable Length: 22cm+160cm=182cm
Motor power display: always 0 ---solve problem way
Parameter C11 was wrong. It was on 1,
The correct value for LCD8S is 0.
After change it from 1 to 0,
Everything works correctly